Insta360 App: Operating Instructions for the Stats Feature

Insta360 App: Operating Instructions for the Stats Feature

Applicable Models: ONE X, X2, X3, X4, X4 Air, X5, Ace, Ace Pro, Ace Pro 2, GO 3, GO 3S, GO Ultra, ONE R, and ONE RS

If you want to make your videos more engaging, you can add real-time activity data/a dashboard (such as speed, altitude, total distance, gradient, and route) using the Insta360 app. This article details how to find the Stats feature and add data using various methods, including your phone and the GPS Preview Remote, helping you get started quickly and enhance your video content.

---

What types of data does the Stats feature support?

• Real-Time activity data

This feature supports basic data display, including speed, altitude, total distance, gradient, and route.

• Opening Summary and Closing Summary

This feature supports dedicated summary data display at the beginning and end of your video. Data shown varies by activity type:

Activity	Displayed Data
Diving	Depth-time curve, diving duration, max depth, average heart rate, maximum heart rate, and calories
Running	Route, distance, ascent, average pace, fastest pace, calories, and duration
Skiing	Route, distance, descent, top speed, average speed, calories, and duration
Cycling	Route, distance, ascent, max power, average power, max cadence, calories, and duration
Motorcycling	Route, distance, ascent, average speed, top speed, and duration

In addition to specific activity types, two general data configuration modes are available for more scenarios:

Configuration Mode	Applicable Scenario	Displayed Data
GPS File Configuration	When importing external GPS data files	Route, distance, ascent, average speed, top speed, and duration
General Configuration	When the activity type is not otherwise specified

Notes on using "Opening Summary" and "Closing Summary"

• When "Opening Summary" or "Closing Summary" is enabled, summary data is automatically generated within the first 2 seconds of a video. Other Stats dashboard components will not be displayed during this period.
• This feature is only supported for videos 4 seconds or longer. It cannot be enabled for videos shorter than 4 seconds.
• Currently, this feature is supported on all Stats dashboards except CFMOTO.

How to prepare for shooting

Connect the camera to the Insta360 app and record a short clip. This allows the camera to automatically sync the accurate timecode from your phone. Afterwards, you can disconnect and shoot separately. For data to be recorded successfully, the footage's shooting time must overlap with the activity period logged by your sports devices.

How to find Stats

Method 1: From the Player page

Open the Insta360 app, go to Album, and select the media you want to edit to enter the Player page

• For 360 videos: Tap "Editor" > "Frame Cut" > "Confirm Clip" > "Edit and Export" > "Stats"

• For flat videos: Tap "Editor" > "Edit" > "Stats"

Method 2: From the Edit page

Open the Insta360 app, go to the Edit page, tap "Create a Video" > select your desired media > tap "Edit" > "Stats"

Method 3: From Settings

Open the Insta360 app, tap "Me", go to Settings> tap "Dashboard Data Authorization" > "Preview Dashboard" > "Use Dashboard" > select the media you want to add Stats to access the Stats page.

How to add Stats

Method 1: Using your phone

Via the Insta360 app (recording data while shooting)

1. Record videos with GPS data

Open the Insta360 app and connect the camera > go to the Shooting page in the app > tap "More" in the upper right corner > turn on GPS > tap "Start Recording".

Please note: Keep the Insta360 app and camera connected throughout the recording. Turning off the screen or exiting the app during recording will cause inaccurate GPS signal acquisition. You can tap the lock icon in the upper right to enable Screen Lock (long press to unlock) to prevent accidental touches from affecting GPS signal acquisition.

2. Find the recorded video

After shooting, go to the Album page in the Insta360 app, select the video you just recorded, and enter the video playback screen.

3. Add Stats data

• For 360 videos: Tap "Editor" > "Frame Cut" > "Confirm Clip" > "Edit and Export" > "Stats", then select the activity data you want to display.

• For flat videos: Tap "Editor" > "Edit" > "Stats", then select the activity data you want to display.

For a more intuitive operational demonstration, please refer to the Tutorial for Adding Stats in Insta360 App.

Please note:

• Turning off the screen or exiting the Insta360 app during recording will stop the recording.
• When exporting a video with Stats data, you must select "Flat Video". Exporting 360 videos with Stats data is not currently supported.
• If there is strong signal interference in the shooting environment, it might prevent GPS data from being acquired. It is recommended to shoot in open outdoor areas.
• The Stats feature is currently not supported for footage shot in the following modes: Timelapse, Starlapse, TimeShift, Slow Motion, and Bullet Time.

Via GPS Activity Stats in the Insta360 app (adding Stats separately after shooting)

Please refer to: Insta360 App: Use GPS Activity Stats to Add Stats Data

For a more intuitive operational demonstration, please refer to the Tutorial for Adding Stats Data via GPS Activity Stats.

Method 2: Using the GPS Preview Remote

Please refer to: Insta360 App: Add Stats Data Using the GPS Preview Remote

Method 3: Using third-party sports devices

Please refer to: Insta360 App: Add Stats Data from Third-party Sports Devices

Method 4: Via third-party sports & health data platforms

Please refer to: Insta360 App: Add Stats Data from Third-party Sports & Health Data Platforms (Strava)

How to adjust layout and language settings after adding Stats

We recommend updating your Insta360 app to v2.16.0 or later for a smoother experience. After adding Stats data, you can access the Stats editing page to configure the following settings:

• Switch data sources: An option for switching between data sources is located at the bottom of the page. Tap it to quickly switch between different data sources.

• Perform time correction: Time correction options are presented in text format and can be adjusted according to your needs.

• Edit Stats dashboard style: Thumbnail previews are provided for all dashboard styles (e.g., Rhythm, Speed). After tapping your desired dashboard style, you can select the activity data to display. Drag data components to adjust their position, and use two-finger pinch gestures to resize them.

• Save layout: After customizing, tap "Save Layout" to generate a personalized template (up to 50 templates can be saved).

• Apply or delete layout: For future use, find your desired template under "My Layouts" and apply it with one tap. Tap and hold a template to delete it.

• Switch between distance units (km/mile): On the adding Stats page, tap the "km/h" icon in the upper right corner to switch between different units.

How to disconnect third-party accounts associated with Stats

Please refer to: Insta360 App: How to Disconnect Third-party Accounts Associated with Stats