Specs

Q1 What are the weight and dimensions of the different ONE RS parts？

Please refer to the table below:

Module	Weight (g/oz)	Dimensions (mm/in)
Core	44.5g / 1.6oz	37x35x27.4mm 1.6x1.4x1.1in
Battery Base	38.8g / 1.4oz	72.1x27.4x14mm 2.8x1.1x0.2in
1-Inch Wide Angle Lens	80g / 2.82oz	35x38x43mm 1.4x1.5x1.7in
4K Boost Lens	42g / 1.5oz	35x35x32.6mm 1.4x1.4x1.3in
360 Lens	41g / 1.4oz	35x35x43mm 1.4x1.4x1.7in
1-INCH 360 Lens	122g / 4.3oz	52.4x48.6x49.4mm 2.1x1.9x1.94in

Q2 What’s the working temperature range of ONE RS?

The working temperature of ONE RS is -4 to 104°F (-20 to 40°C). Please also note that in low-temperature environments (below 32°F or 0°C) the battery life may be affected.

Q3 Is ONE RS waterproof?

Water resistance differs by Edition. Please refer to the following table for full waterproofing info:

Lens	Waterproofing	Requirements
4K Boost Lens 360 Lens 1-Inch Wide Angle Lens	IPX8 waterproof to 5 meters (16.4ft)	The Lens must be assembled together with the Core and Battery Base, and secured in the Mounting Bracket.
1-Inch 360 Lens	IPX3 water resistant	The lens must be assembled together with the Core and ONE RS 1-Inch 360 Vertical Battery Base, and secured in the Mounting Bracket for 1-Inch 360 Lens. It is protected against light rain and snow, but should not be submerged in water or used for activities involving high-velocity water such as action sports in rainy weather, surfing or water skiing.

* The following instructions use the 4K Boost Lens as an example.

1. ONE RS is waterproof only after being fully assembled and installed in the Mounting Bracket (Be sure the Lens and Core have been firmly connected and that the battery buckle has snapped into place). NOTE: The individual camera Lens, Core and Battery Base are NOT waterproof on their own.

Press the Lens, Core and Battery Base together until they firmly connect (Ensure that the battery buckle has snapped into place on the left side. The yellow indication mark near the buckle should be covered.)

2. Always ensure ONE RS is dry and clean before closing the lock cover. When using it in or around water, dirt or sand, make sure that the lock cover is closed completely, or waterproofing may be compromised (a. Before closing the lock cover, push the connection cable of the lock cover back into the cable slot, taking care not to bend the cable. b. Align the circular indication marks as shown on the left. The yellow indication mark near the lock buckle should be covered).

3. When using ONE RS in water, please lock the touch screen to avoid accidental presses. After locking the touch screen, you can use the Power Button to change modes.

4. After every use in water, open the Mounting Bracket, take out ONE RS, clean and dry ONE RS with a soft cloth before pulling all modules apart. Without properly drying ONE RS, water droplets could remain and damage the camera.
Note: If using in salt water, gently rinse ONE RS with fresh water first before drying; soak the Mounting Bracket in fresh water for at least 60 minutes and rinse it with fresh water before drying.

5. To disassemble ONE RS after use in water, follow the instructions below. Ensure ONE RS is fully dry before disassembling.
1: Push the battery buckle and pull the Battery Base off horizontally.
2: Pull the Core and the Lens apart horizontally.

IMPORTANT: When disassembling ONE RS after underwater use, if you see that some water remains on the interior surfaces of the individual components, this is normal and you should wipe these surfaces with a dry cloth before storage or continued use ( The waterproofing of ONE RS relies primarily on the use of targeted protective barriers directly surrounding metal connectors).

6. Applying strong vibrations, shocks or pressure to the product may compromise waterproofing performance.

* Disclaimer

Please read this Disclaimer carefully. Using the camera and its relevant accessories means that you acknowledge and accept the terms of this disclaimer.
By using this camera, you hereby acknowledge and agree that you are solely responsible for your own conduct when using this camera and any consequences thereof. You agree to use this camera only for proper and lawful purposes. You understand and agree that Arashi Vision Inc. (hereinafter referred to as 'Insta360') accepts no liability for any and all misuse, consequences, damages, injuries, penalties, or any other legal responsibility directly or indirectly incurred by your using this camera and associated accessories.
Before every use, make sure that your accessories are functioning properly. If there’s any damage or irregularity, stop using them immediately.
Within the scope of state laws and regulations, Insta360 reserves the right of final explanation and revision for the commitment.

Q4 What is the battery capacity for ONE RS?

There are four types of batteries that can be used with ONE RS:

Battery Type	Capacity (mAh)
ONE RS Battery Base	1445mAh
ONE R Battery Base (Not compatible with all ONE RS accessories. For more info, click here)	1190mAh
ONE RS 1-Inch 360 Vertical Battery Base	1350mAh
Boosted Battery Base	2380mAh
ONE R Vertical Battery Base	1200mAh

Q5 How many mics does ONE RS have? What audio modes are supported?

ONE RS has three built-in mics. Available audio modes vary according to the lens used:

Lens	Audio Modes
360 Lens	Wind Reduction(This mode will actively suppress wind noise according to the environment, the human voice will be affected, please use only in windy environments.) Stereo
1-Inch 360 Lens	Wind Reduction(This mode will actively suppress wind noise according to the environment, the human voice will be affected, please use only in windy environments.) Stereo
1-Inch Wide Angle Lens	Wind Reduction Stereo Direction Enhancement(Enhance the audio source's directional sensitivity.)
4K Boost Lens	Wind Reduction Stereo Direction Enhancement(Enhance the audio source's directional sensitivity.)

Q6 What's the minimum safety distance of ONE RS?

There is a safety distance for all 360 camera, because there is parallax between two lenses, and there is no way to stitch them properly if they are too close. It is just like seeing different images from our left and right eyes.
However, when it is beyond the safety distance, the parallax will be eliminated and the stitching can be performed normally. Therefore, when using the camera, it is recommended to keep a certain distance between the subject and camera.
The minimum safety distances of ONE RS 360 lens are as follows:

Lens	The minimum safety distance
360 Lens	60cm
1-Inch 360 Lens	50cm

Please click here to contact us for further support.