Applicable Models: Luna Ultra
It is recommended to use the official USB-C cable that comes with the camera. The camera supports fast charging. You can use a fast charger that supports PD, QC, or DCP protocols, with a maximum charging specification of 15V/3A.
Connect one end of the USB-C cable to the camera and the other end to a power adapter, then plug the adapter into a power outlet to start charging.
Please note: The above data is measured at room temperature using a 15V/3A power adapter. Actual charging times may vary under different conditions.
Depending on the camera's operating status, you can check the battery level and charging progress via the indicator light and screen as described below:
|
Camera Status |
How to Check |
|
Standby |
The status indicator light is solid green. You can check the remaining battery level and charging progress of the main unit and the Detachable Touchscreen Remote via the battery icon in the top-right corner of the shooting page. |
|
Powered off |
When you connect a charging cable, the screen will automatically display the charging progress of the main unit and the Detachable Touchscreen Remote. If the camera is in the screen-off mode, simply tap the screen to display the charging progress. |
When the main unit runs out of battery but the Detachable Touchscreen Remote still has power, the Detachable Touchscreen Remote cannot be used alone. It must be powered by the main unit to operate normally.
|
Camera |
Shooting Specification |
Battery Life |
|
Main unit |
Video at 1080p@24fps |
About 4 hours |
|
Video at 4K@60fps |
About 2 hours | |
|
Video at 4K@30fps |
About 2.5 hours | |
|
Video at 8K@30fps |
About 1 hour and 50 minutes | |
|
PureVideo at 4K@60fps |
About 1 hour and 43 minutes | |
|
PureVideo at 4K@30fps |
About 2 hours and 5 minutes | |
|
Video at 4K@30fps with Beautify enabled |
About 1 hour and 56 minutes | |
|
Video at 4K@30fps with Detachable Touchscreen Remote |
About 70 minutes | |
|
Detachable Touchscreen Remote |
Requires power supply from the main unit to operate and can not operate with its own battery only | |
*The above data was measured in a laboratory environment at 77°F (25°C).
Yes. However, in this case, the charging power is limited, and charging will pause at higher temperatures to protect the battery.
This feature is currently not supported. We will continuously optimize our products to provide you with a better user experience. Thank you for your understanding and support!