insta360
Englishinsta360
简体中文
English
Deutsch
日本語
Español
Français
Italiano
한국어
X6

X Series: Standard Lens Guard and Premium Lens Guard

X Series: Standard Lens Guard and Premium Lens Guard

Applicable Models: X3, X4, X4 Air, X5, and X6

Installing a Lens Guard on the camera unlocks more usage scenarios. This article describes the specifications of the Standard Lens Guard and Premium Lens Guard and provides answers to some frequently asked questions to help you use the accessories smoothly.

Specifications

Item

insta360

insta360

insta360

insta360

insta360

insta360

insta360

insta360

insta360

insta360

X Series

Insta360 X6 Premium Lens Guard

Insta360 X6 Standard Lens Guard

Insta360 X5 Premium Lens Guard

Insta360 X5 Standard Lens Guard

Insta360 X4 Air Premium Lens Guard

Insta360 X4 Air Standard Lens Guard

Insta360 X4 Premium Lens Guard

Insta360 X4 Standard Lens Guard

Insta360 X3 Premium Removable Lens Guard

Insta360 X3 Standard Removable Lens Guard

Weight

About 0.25oz (7g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

About 0.25oz (7g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

About 0.15oz (4.2g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

About 0.15oz (4.2g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

About 0.14oz (3.96g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

About 0.14oz (4.04g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

About 0.13oz (3.8g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

About 0.06oz (1.8g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.
  • Base: About 0.03oz (0.9g)
  • Lens Guard: About 0.08oz (2.4g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.
  • Base: About 0.03oz (0.9g)
  • Lens Guard: About 0.04oz (1g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

Dimensions (W × H × D)

φ1.72 × 0.51in (43.71 × 13.03mm)

φ1.72 × 0.51in (43.71 × 13.03mm)

1.39 × 1.41 × 0.46in (35.2 × 35.7 × 11.65mm)

1.39 × 1.41 × 0.46in (35.2 × 35.7 × 11.65mm)

1.31 × 1.29 × 0.45in (33.35 × 32.73 × 11.53mm)

1.31 × 1.29 × 0.45in (33.35 × 32.73 × 11.53mm)

1.37 × 1.37 × 0.50in (34.8 × 34.8 × 12.8mm)

1.36 × 1.36 × 0.39in (34.5 × 34.5 × 10mm)
  • Base: 1.42 × 1.48 × 0.11in (36 × 37.5 × 2.8mm)
  • Lens Guard: 1.15 × 1.27 × 0.44in (29.3 × 32.3 × 11.3mm)
  • Base: 1.42 × 1.48 × 0.11in (36 × 37.5 × 2.8mm)
  • Lens Guard: 1.18 × 1.26 × 0.37in (30 × 32 × 9.3mm)

Material

Glass, plastic, and magnet

Glass, plastic, and magnet

Glass, plastic, and magnet

Glass, plastic, and magnet

Glass and plastic

Glass and plastic

Glass and plastic

Plastic

Glass and plastic

Plastic

In the Box

Insta360 X6 Premium Lens Guard × 2

Lens Cloth × 1

Insta360 X6 Standard Lens Guard × 2

Lens Cloth × 1

Insta360 X5 Premium Lens Guard × 2

Lens Cloth × 1

User Manual × 1

Insta360 X5 Standard Lens Guard x 2

Lens Cloth × 1

User Manual × 1

Insta360 X4 Air Standard Lens Guard x 2

Lens Cloth × 1

User Manual × 1

Insta360 X4 Air Standard Lens Guard x 2

Lens Cloth × 1

User Manual × 1

Insta360 X4 Premium Lens Guard x 2

Lens Cloth × 1

User Manual × 1

Insta360 X4 Standard Lens Guard x 2

Lens Cloth × 1

User Manual × 1

Insta360 X3 Premium Removable Lens Guard × 2

Screen-side Base × 1

Logo-side Base × 1

Triangular Removal Tool × 1

Spare Double-sided Adhesive Tape (Screen Side) × 2

Spare Double-sided Adhesive Tape (Logo Side) × 2

Lens Cloth × 1

Insta360 X3 Standard Removable Lens Guard × 2

Screen-side Base × 1

Logo-side Base × 1

Triangular Removal Tool × 1

Spare Double-sided Adhesive Tape (Screen Side) × 2

Spare Double-sided Adhesive Tape (Logo Side) × 2

Lens Cloth × 1

Serial Number Location

insta360

insta360

insta360

insta360

insta360

insta360

insta360

insta360

insta360

insta360

Invisible When Attached to the Camera

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Compatibility with Other Accessories

Not compatible with Insta360 X6 Invisible Dive Case Pro

Not recommended for use with X6 Carry Bag

Not compatible with Insta360 X6 Invisible Dive Case Pro

Not recommended for use with X6 Carry Bag

Not compatible with Dive Case

Compatible with all other X5‑exclusive accessories

Not compatible with Dive Case

Compatible with all other X5‑exclusive accessories

Not compatible with Invisible Dive Case

Not compatible with Invisible Dive Case

Only compatible with X4; remove the Lens Guard before using with a Dive Case

Only compatible with X4; remove the Lens Guard before using with a Dive Case

Only compatible with X3; remove the Lens Guard before using with a Dive Case (no need to remove the base)

Only compatible with X3; remove the Lens Guard before using with a Dive Case (no need to remove the base)

Warranty Period

12 months

12 months

12 months

12 months

12 months

12 months

12 months

12 months

3 months

3 months

Application Scenarios

Supported: Road cycling, mountain biking, motorcycling, and vlogging

Not Supported: Not recommended for use in water‑related scenarios due to fogging risk.

Supported: Road cycling, mountain biking, motorcycling, vlogging

Not Supported: Not recommended for use in water‑related scenarios due to fogging risk.

Supported: Cycling, hiking, and other non‑water-related scenarios

Not Supported:

  • It is not recommended to use in water-related scenarios such as surfing or rainy conditions, as it may cause fogging and affect shooting results.
  • It is not recommended to use on snowy slopes, as impacts or snow contact may allow dirty water or snow to enter and cause fogging.

Supported: Cycling, hiking, and other non‑water-related scenarios

Not Supported:

  • It is not recommended to use in water-related scenarios such as surfing or rainy conditions, as it may cause fogging and affect shooting results.
  • It is not recommended to use on snowy slopes, as impacts or snow contact may allow dirty water or snow to enter and cause fogging.

Supported: Cycling, hiking, and other non‑water-related scenarios

Not Supported:

  • It is not recommended to use in water-related scenarios such as surfing or rainy conditions, as it may cause fogging and affect shooting results.
  • It is not recommended to use on snowy slopes, as impacts or snow contact may allow dirty water or snow to enter and cause fogging.

Supported: Cycling, hiking, and other non‑water-related scenarios

Not Supported:

  • It is not recommended to use in water-related scenarios such as surfing or rainy conditions, as it may cause fogging and affect shooting results.
  • It is not recommended to use on snowy slopes, as impacts or snow contact may allow dirty water or snow to enter and cause fogging.

Supported: Non‑water-related scenarios

Not Supported:

  • It is not recommended to use in water-related scenarios such as surfing or rainy conditions, as it may cause fogging and affect shooting results.
  • It is not recommended to use on snowy slopes, as impacts or snow contact may allow dirty water or snow to enter and cause fogging.

Supported: Non‑water-related scenarios

Not Supported:

  • It is not recommended to use in water-related scenarios such as surfing or rainy conditions, as it may cause fogging and affect shooting results.
  • It is not recommended to use on snowy slopes, as impacts or snow contact may allow dirty water or snow to enter and cause fogging.

Supported: Cycling, hiking, and other non‑water-related scenarios

Not Supported:

  • It is not recommended to use in water-related scenarios such as surfing or rainy conditions, as it may cause fogging and affect shooting results.
  • It is not recommended to use on snowy slopes, as impacts or snow contact may allow dirty water or snow to enter and cause fogging.

Supported: Cycling, hiking, and other non‑water-related scenarios

Not Supported:

  • It is not recommended to use in water-related scenarios such as surfing or rainy conditions, as it may cause fogging and affect shooting results.
  • It is not recommended to use on snowy slopes, as impacts or snow contact may allow dirty water or snow to enter and cause fogging.

Precautions
  • The Lens Guard contains magnetic material. Keep it away from devices that may be affected by magnetic fields, such as pacemakers.
  • Avoid applying excessive force to squeeze or pull the base of the Lens Guard during installation, as this may cause deformation or detachment.
  • Make sure both the front and rear Lens Guards are securely tightened, with the color marking (blue for the Standard Lens Guard, orange for Premium Lens Guard) facing up.
  • If the Lens Guard is installed during recording, saving, upgrading, or formatting, the icon will appear, but no pop‑up will be shown.
  • The Lens Guard may slightly affect stitching quality. Try to keep the lens aimed at the subject.
  • Keep the Lens Guard clean. Dirty or scratched surfaces may affect image quality.
  • The Lens Guard is not sealed. Avoid using it in water‑related scenarios such as surfing or rainy conditions.
  • Keep the Lens Guard and its surrounding area dry. In snowy, wet, or humid conditions, fogging may occur. If fogging appears, wipe it with the included Lens Cloth or a soft cloth.
  • Avoid applying excessive force to squeeze or pull the base of the Lens Guard during installation, as this may cause deformation or detachment.
  • Make sure the Lens Guard on both the screen side and the back of the camera are securely tightened, with the center point of the Lens Guard groove aligned with the circular microphone hole.
  • If the Lens Guard is installed during recording, saving, upgrading, or formatting, the icon will appear, but no pop‑up will be shown.
  • The Lens Guard may slightly affect stitching quality. Try to keep the lens aimed at the subject.
  • Keep the Lens Guard clean. Dirty or scratched surfaces may affect image quality.
  • The Lens Guard is not sealed. Avoid using it in water‑related scenarios such as surfing or rainy conditions.
  • Keep the Lens Guard and its surrounding area dry. In snowy, wet, or humid conditions, fogging may occur. If fogging appears, wipe it with the included Lens Cloth or a soft cloth.
  • The Lens Guard contains magnetic material. Keep it away from devices that may be affected by magnetic fields, such as pacemakers.

N/A

N/A
  • Avoid applying excessive force to squeeze or pull the base of the Lens Guard during installation, as this may cause deformation or detachment.
  • Make sure the Lens Guard is securely tightened (with the orange/blue marking aligned with the microphone hole).
  • After installing the Lens Guard, enable "Lens Guards Mode" on the camera. After removing it, disable "Lens Guards Mode".
  • Keep the Lens Guard clean. Dirty or scratched surfaces may affect image quality.
  • The Lens Guard is not sealed. Avoid using it in water‑related scenarios such as surfing or rainy conditions.
  • Keep the Lens Guard and its surrounding area fully dry. If exposed to snow, water, or mist, wipe it dry with a soft, dry cloth before use. Otherwise, fogging may occur on the inside of the Lens Guard.
  • Make sure the base of the Lens Guard is pressed firmly into place during installation.
  • After installing the Lens Guard, enable "Lens Guards Mode" on the camera. After removing it, disable "Lens Guards Mode".
  • Keep the Lens Guard clean. Dirty or scratched surfaces may affect image quality.
  • The Lens Guard is not sealed. Avoid using it in water‑related scenarios such as surfing or rainy conditions.
  • Keep the Lens Guard and its surrounding area fully dry. If exposed to snow, water, or mist, wipe it dry with a soft, dry cloth before use. Otherwise, fogging may occur on the inside of the Lens Guard.
  • If you need to replace the double‑sided adhesive tape on the base, use the triangular Removal Tool to remove the base, clean off any residual adhesive, apply spare tape for the corresponding base, and reinstall the base.

How to install and remove the Lens Guard

The Lens Guard can be removed and replaced by the user. The procedure varies slightly by model. We recommend keeping the Lens Guard installed during daily use to prevent lens damage. Follow the instructions below for your specific model:

X6

Installing the Lens Guard

  1. Align the color marking on the Lens Guard (blue for the Standard Lens Guard and orange for the Premium Lens Guard) with the notch on the top‑left of the camera lens. Rotate the Lens Guard clockwise until it is fully tightened, with the color marking facing up on both front and rear lenses.

insta360

  1. After installing the screen‑side Lens Guard, the Lens Guard icon will appear in the status bar on the camera screen, and a pop‑up notification will appear. Tap to confirm the pop‑up.

insta360

insta360

Removing the Lens Guard

Hold the Lens Guard base with your thumb and index finger, and rotate the Lens Guard counter‑clockwise to remove it. The Lens Guard icon will disappear from the status bar after removal.

insta360

X5 and X4 Air

Installing the Lens Guard

  1. Align the center of the Lens Guard groove (Standard Lens Guard) or the orange marking (Premium Lens Guard) with the notch on the bottom‑right of the camera lens. Rotate the Lens Guard clockwise until the marking aligns with the microphone hole on the camera.

insta360

  1. After installing the screen‑side Lens Guard, the Lens Guard icon will appear in the camera status bar, and a pop‑up notification will appear. Tap to confirm the pop‑up.

insta360

Removing the Lens Guard

Hold the Lens Guard base with your thumb and index finger, and rotate the Lens Guard counter‑clockwise to remove it. The Lens Guard icon will disappear from the status bar after removal.

insta360

For a more intuitive operational demonstration, refer to the X5 Lens Guard Installation Tutorial.

X4

Installing the Lens Guard

  1. Align the color marking on the Lens Guard (blue for the Standard Lens Guard and orange for the Premium Lens Guard) with the notch on the bottom‑right of the lens. Rotate the Lens Guard clockwise to install it, making sure the marking aligns with the microphone hole on the camera, and ensure the Lens Guard is securely tightened.

insta360

  1. After installation, turn on the camera and confirm that "Lens Guards Mode" is enabled.

Please refer to: X Series: Lens Guards Mode

Removing the Lens Guard

Hold the edge of the Lens Guard base and twist the Lens Guard counter‑clockwise to remove it. After removal, disable "Lens Guards Mode".

For a more intuitive operational demonstration, refer to the X4 Lens Guard Installation Tutorial.

X3

The Removable Lens Guard for X3 requires attaching the base before installing the Lens Guard.

Installing the Base

Peel off the protective film from the base. Attach the logo‑side base and the screen‑side base to the corresponding lenses, making sure the protrusion on the edge of the base aligns with the notch below the lens. After attaching, press firmly for 15 seconds to ensure the base is fully adhered to the surface.

insta360

insta360

Please note: 

  • If the base is not attached evenly, it may affect stitching quality.
  • If you need to replace the double‑sided adhesive tape on the base, use the triangular Removal Tool to remove the base, clean off any residual adhesive, apply spare tape for the corresponding base, and reinstall the base.

Installing the Lens Guard

Align the protrusion on the Lens Guard with the groove on the base, then place the Lens Guard into position. Rotate the Lens Guard clockwise to the far right of the top groove to lock the Lens Guard in place.

insta360

Removing the Lens Guard

Rotate the Lens Guard counter‑clockwise to remove the Lens Guard. After removal, disable "Lens Guards Mode".

For a more intuitive operational demonstration, refer to the X3 Lens Guard Installation Tutorial.

FAQ

I. X5 and X4 Air

How to enable/disable the Lens Guards Mode?

The camera and Lens Guards have been fully upgraded to support smart Lens Guard detection. The camera automatically identifies the protection status via sensors and Hall‑effect algorithms, eliminating the need to manually enable/disable the Lens Guards Mode.

II. X4
  1. What is the difference between the Premium Lens Guard and the Standard Lens Guard? Why does the Premium Lens Guard have a different curvature and a more prominent bulge compared to the Standard Lens Guard?

X4 comes with two Standard Lens Guards (front and back) that provide basic lens protection. If you require higher scratch resistance, we recommend purchasing the Premium Lens Guard. The Premium Lens Guard is made of high‑strength optical glass, which differs from the material used in the Standard Lens Guard, resulting in a different curvature. However, neither affects image quality.

  1. How to distinguish the Standard Lens Guard and the Premium Lens Guard?

Both Lens Guards are marked with different colors to distinguish them. You can find the marking below the outer edge of the lens guard; the Standard Lens Guard has a blue marking, and the Premium Lens Guard has an orange marking.

insta360

  1. How to wipe/clean the Lens Guard?

Gently wipe the Lens Guard with the officially provided Lens Cloth.

  1. Do the Lens Guards differentiate between the front and rear lenses?

No, the Lens Guards do not differentiate between the front and rear lenses.

  1. Does shooting with a Lens Guard affect image quality on the X4 camera?

Using a Lens Guard may have a slight impact on image quality, as the glass may increase reflections or slightly reduce light transmission. If you prioritize optimal image quality, we recommend using the camera without a Lens Guard, provided the camera is kept safe.

  1. Will the Premium Lens Guard deliver better image quality than the Standard Lens Guard?

Yes. The Standard Lens Guard is made of plastic, while the Premium Lens Guard is made of optical glass, which offers higher light transmission, resulting in better image quality.

III. X3
  1. What are the main characteristics and differences between the Adhesive Lens Guard and the Standard Removable Lens Guard?

Both the Adhesive Lens Guard and the Standard Removable Lens Guard are made of plastic and offer similar light transmission and performance. Neither is suitable for use in water‑related scenarios. Their main differences are as follows:

  • Structure: The Standard Removable Lens Guard features a non‑sealed design, which reduces the likelihood of fogging.
  • Ease of installation: The Standard Removable Lens Guard is easier to install and remove, making it more convenient when frequent removal or cleaning is required.
  • Accessories: The Standard Removable Lens Guard comes with a base in addition to the guard itself. The base does not need to be replaced every time; if the adhesive loses its stickiness, simply replace the adhesive tape on the base.

  1. What is the difference between the Standard Removable Lens Guards for X3 and X4?

The Standard Removable Lens Guards for X3 and X4 are essentially identical in terms of material, light transmission, and performance. Neither is suitable for water‑related scenarios, and both use a non‑sealed design to reduce fogging.

Their main difference lies in installation: the Standard Removable Lens Guard for X3 requires a separate base, while that for X4 can be installed directly onto the camera's existing lens base.

  1. How to wipe/clean the Standard Removable Lens Guard and the Premium Removable Lens Guard for X3?

Gently wipe the Lens Guard with the officially provided Lens Cloth.

  1. Do the Standard Removable Lens Guard and the Premium Removable Lens Guard for X3 differentiate between the front and rear lenses?

The Lens Guards themselves do not differentiate between front and rear lenses, but the bases do. Please follow the instructions in the user manual for proper installation.

  1. Do I need to update the camera firmware to use the Standard Removable Lens Guard for X3?

For a better shooting experience, we recommend updating the X3 camera firmware to the latest version, as well as updating the Insta360 app to v1.61.1 or later and Insta360 Studio to v5.1.0 or later.

  1. Will installing the front and rear bases of the Standard Removable Lens Guard for X3 backwards affect stitching results?

Yes. The front and rear bases have a slight height difference. If installed backwards, stitching results may be affected. Please follow the instructions in the user manual to reinstall the bases correctly to ensure optimal performance and image quality of the camera.

  1. Can the Utility Frame be used together with the Standard Removable Lens Guard for X3?

Yes.

  1. What is the difference between the Standard Removable Lens Guard and the Premium Removable Lens Guard for X3?
  • Similarities: Both are reusable and removable. Neither is recommended for use in water‑related scenarios.
  • Differences: The Standard Removable Lens Guard is made of plastic, while the Premium Removable Lens Guard is made of tempered glass, offering higher strength and better scratch resistance.

  1. What is the difference between the Premium Removable Lens Guards for X3 and X4?
  • Similarities
    • Both are made of tempered glass, with similar light transmission, performance, and hardness (pencil hardness 10H).
    • Neither is recommended for use in water‑related scenarios.
    • Both feature a non‑sealed design that reduces the likelihood of fogging.
  • Differences
    • Compared to the Premium Removable Lens Guard for X3, the Premium Removable Lens Guard for X4 includes a base that does not need to be replaced every time. If the adhesive becomes less effective, only the adhesive tape on the base needs to be replaced.
    • On the Premium Removable Lens Guard for X4, its base and the camera lens are integrated as one piece; on that for X3, they are separate.

  1. Why can't I find the Premium Lens Guard option on X3 / Insta360 App / Insta360 Studio? Or why do stitching issues occur when using the Premium Lens Guard?
  • Ensure your device has been updated to the following versions:
    • X3 Firmware: v1.1.0 or later
    • Insta360 app: v2.1.0 or later
    • Insta360 Studio: v5.6.2 or later
  • If you have already shot media with this issue, update the Insta360 app and Insta360 Studio to the versions above, then export the media with the "Premium Lens Guards" option selected.
    • Insta360 app: Go to the Player page > tap "Settings" (Gear icon ⚙) in the top left corner > "Accessories" > check and select "Premium Lens Guards".
    • Insta360 Studio: Go to "Stitching" > "Lens Stitching Option" > check and select "Premium Lens Guards".

Read more

X Series: Lens Guards Mode

insta360
Online Chat
Office Hours: 24/7
Start Chat
Copyright © insta360.com All Rights Reserved.