Lens Guard Installation & User Guide

Selecting a Lens Guard

You can differentiate and choose the appropriate lens guard based on your shooting scenario via the color markings on the grooves (the installation method for both lens guards is completely identical):

• Standard Lens Guard (Blue Marking)
• Premium Lens Guard (Orange Marking).

Installation & Detachment

• Installation Preparation: Carefully clean the camera lenses, as well as the inner and outer surfaces of the lens guards, using the dedicated lens cloth to prevent dust and stains from affecting image quality.
• Installation Steps: Hold the handles on both sides of the lens guard with your hand, and align the 3 notches on the inner side of the lens guard with the 3 cutouts on the camera lens decorative ring. Align the blue mark on the lens guard with the upper left corner of the lens, then rotate clockwise to tighten until the blue mark turns straight to the top. Install the lens guard on the other side in the same manner.
• Detachment Steps: Hold both sides of the lens guard with your hand and rotate counterclockwise to easily detach it.

Switching Lens Guard Mode

When the double-sided lens guards are installed, a confirmation prompt will pop up on the camera screen. After tapping confirm, the corresponding lens guard type icon will be displayed in the screen status bar, indicating that the camera has successfully switched to the corresponding stitching mode.

Precautions

• Anti-Fog & Waterproofing: Both lens guards are non-sealed structures; please do not use them in water-related scenarios such as surfing, swimming, or rainy days to avoid fogging inside the lens elements. If fogging accidentally occurs during use, remove and dry them before reinstalling.
• Magnetic Safety: The interior of the lens guards contains magnetic substances; please keep them away from medical devices easily disrupted by magnets, such as pacemakers.