Live Streaming Tutorial
*To acLive‑streaming functionality will be supported in subsequent firmware updates. Please keep your firmware up‑to‑date.
To achieve the best and smoothest streaming experience, please read the following operational guidelines before starting
Pre-Streaming Preparation & Supported Platforms
1. Supported Platforms & Streaming Modes
The camera supports two modes: 360 Live and Flat Live. Specific platform compatibility is as follows:
- Dual 360 & Flat Mode Support: Douyin, Kuaishou, YouTube, Facebook, and custom RTMP protocols.
- Flat Mode Only Support: WeChat Video Channels.
2. Network Requirements (Recommended Tiers)
Since outdoor live streaming primarily relies on mobile hotspots or portable Wi-Fi, which are prone to network environment fluctuations, the system features a built-in Adaptive Bitrate (ABR) solution. It will automatically optimize image quality based on your real-time uplink bandwidth.
Core Streaming Workflow (Guided via Mobile App)
Insta360 X6 supports STA (Station) live streaming mode. Once configuration is complete, X6 will directly connect to the network to push the stream. The mobile App can then be switched to the background or completely closed without affecting normal smartphone usage.
1. Connect Camera
Enable Wi-Fi and Bluetooth on your mobile phone, and connect X6 to the Insta360 app.
2. Enter Live Mode
Switch to "Live" in the mode bar at the bottom of the app shooting page, and select the platform you wish to stream on.
3. Authorization & Fetching Address
The system will automatically wake up account authorization for the third-party platform. Once successful, it will retrieve the corresponding live stream ingestion RTMP URL.
4. Configure Camera Network
Select an available external Wi-Fi network (such as a mobile hotspot, portable Wi-Fi, or indoor router) on the App prompt interface and input the password.
Precautions: Once network pairing begins, the Wi-Fi connection between the phone and the camera will automatically disconnect, and the system will seamlessly switch to a fallback Bluetooth connection to transfer network credentials.
5. Start Live Streaming
When the network configuration is successful, the "Start Live" button at the bottom of the App interface will activate. After clicking it, the ingestion address will be pushed to the camera with one tap, the camera will stream directly to the platform, and the live broadcast officially begins.
Interaction and Status Identification During Live Streaming
1. LED Status Indicators
- Live stream preparing / Idle standby: Solid Cyan
- Live streaming / Pushing stream: Flashes slowly at a constant rate in Red
2. Screen Touch Lock
After entering the live broadcast, the camera screen will automatically activate a touch lock to prevent accidental touches (certain models will trigger screen timeout).
- At this point, all screen touch actions except for ending the live stream and camera zoom will be shielded to prevent accidental operations during outdoor activities.
Ending Live Streaming & Exception Recovery (Resume Streaming)
1. Ending Live Stream Normally:
- Stop Streaming via App: Click "End Live" on the App interface. The stop command is synced to the camera via Bluetooth, and the camera stops pushing the stream and returns to its original preview state.
- Stop Streaming via Camera: Tapping the stop button on the camera screen will trigger a secondary confirmation pop-up asking "End live stream?". Confirming allows for a safe exit.
2. Abnormal Disconnection & Smart Resumption (Break and Resume)
If an abnormal interruption occurs during live streaming, such as a network disconnection, low battery power-off, or over-temperature (overheat) protection, the camera's built-in "Live Memory" feature will automatically save the current ingestion address, Token information, and Wi-Fi configurations.
- Network Jitter: When the network becomes weak or lost, the camera prioritizes silent automatic reconnection. If it does not succeed after 3 retries (or within 20 seconds), a pop-up saying "Network exception, live stream interrupted" will appear on the camera screen.
- Reboot Recovery: After resolving the exception (e.g., replacing the battery or allowing the camera to cool down) and powering back on, a secondary confirmation prompt saying "Continue last live stream?" will immediately pop up on the camera screen:
- Tap "Yes": The camera will automatically enter the live stream preparation state and restart streaming with one tap using the previous configuration, without needing to reset via the mobile App.
- Tap "No": Completely exits the live stream and returns to the camera's initial preview page.
