X6: InstaFrame 2.0

X6: InstaFrame 2.0

Applicable Models: X6

InstaFrame 2.0 allows you to directly capture smooth and stable standard videos with built‑in professional camera movement and smart tracking features. 360 media is also saved simultaneously during recording for more flexible post‑production editing. This article describes the specific operations and the feature differences between it and the InstaFrame Mode.

---

How to enable InstaFrame 2.0

Enter the preview page on your camera, press the icon in the bottom‑right corner > select "Flat" > tap "InstaFrame 2.0". After returning to the preview page, all features are ready for use.

Please note:

• The page UI of this feature may vary slightly between models. Please refer to the actual display on your camera.
• For accessory operation, we recommend following the on‑screen prompts on the camera UI.

How to use Smart Tracking

You can quickly start/stop tracking via the screen. The camera supports tracking both people and objects:

1. Double‑tap a person or object on the screen to activate Smart Tracking.

2. Tap any blank area on the screen to stop the current tracking.

How to use movement effects

During recording, you can trigger the following two camera movements via the touchscreen or remote. Each activation executes the movement only once:

• 360° Spin: Performs a 360° shooting around a subject horizontally.
• Barrel Roll: Performs a 360° shooting around a subject vertically.

How to operate the Virtual Gimbal

Tap the Virtual Gimbal icon on the preview page to enter the Virtual Gimbal Adjustment page. The functional sections are as follows:

Top Section

• Roll & Tilt Lock: Keeps the frame stable even when the camera is bumped, flipped, or shaken in any direction during shooting.
• Roll Lock: Locks only the horizontal orientation of the frame, keeping the horizon steady at all times.
• FPV: The lens fully follows the camera body's movement, capturing a first‑person perspective for a more immersive shooting experience.

Bottom Section

• Virtual Gimbal View Adjustment: Allows you to freely adjust the field of view (FOV) of the flat video image.
• Distortion Correction: Switch the FOV to MegaView, and a grid icon will appear on the left side of the page. Tap the icon to enable or disable Distortion Correction.

How to adjust shooting parameters

Swipe left from the right edge of the screen to enter the parameter adjustment page and modify various shooting parameters as needed.

How to enable 360 Video Backup

If you want to save both flat and 360 media simultaneously, follow these steps:

Enter the preview page on your camera, and swipe up from the bottom of the screen > enable "360 Video Backup". After shooting, both 360 and flat video files will be saved. If the feature is disabled, only flat videos will be saved.

Feature Comparison: X6 InstaFrame 2.0 / InstaFrame 2.0 / InstaFrame 1.0

Feature	X6 InstaFrame 2.0	X5 InstaFrame 2.0	X5 and X4 Air InstaFrame 1.0
Image Quality	360: 8K@30fps Flat: 4K@30fps	360: 5.7K+@30fps Flat: 1080p@30fps (with 360 Video Backup enabled) Flat: 4K@30fps (with 360 Video Backup disabled)	360: 5.7K+@30fps Flat: 1080p@30fps
Beauty	Supported	Not supported	Not supported
360 Video Backup	Supported	Supported	Not supported
Self-Tracking	Supported	Supported	Supported
Tracking Others	Supported	Supported	Not supported
Tracking Objects	Supported	Not supported	Not supported
Low Light Enhancement	Supported	Supported (improved vs. 1.0)	Supported
Virtual Joystick	Not supported	Supported	Not supported
AdaptiveTone	Enabled by default	Only supported when "360 Video Backup" is disabled	Not supported
Tilt Lock	Supported	Supported	Not supported
Stabilized Tracking	Supported	Supported	Not supported (equivalent effect can be achieved by enabling "Horizon Lock")
FPV Mode	Supported	Supported	Not supported (equivalent effect can be achieved by disabling "Horizon Lock")