X Series: Dustproofing & Waterproofing Related FAQ

X Series: Dustproofing & Waterproofing Related FAQ

Applicable Models: ONE X, X2, X3, X4, X4 Air, X5, and X6

To help you safely use your camera in various environments, this article summarizes the camera's performance in underwater and dusty conditions, along with precautions and frequently asked questions.

---

Waterproof Performance

Camera	Waterproof Rating (without Dive Case)	Waterproof Depth (without Dive Case)	Waterproof Depth (with Dive Case)
X6	IPX8	66ft (20m)	196.9ft (60m)
X5 and X4 Air	IPX8	49.2ft (15m)	196.9ft (60m)
X4 and X3	IPX8	32.8ft (10m)	164.0ft (50m)
X2	IPX8	32.8ft (10m)	147.6ft (45m)
ONE X	Not waterproof	Not waterproof	IPX8 up to 98.4ft (30m)

Dustproof Performance

Camera	Dustproof Rating	Dustproof Performance
X6, X5 and X4 Air	IP6X	The device is completely dust-tight, with no dust ingress. It can operate normally in dusty environments without affecting functionality.
X4	IP5X	The device has a certain level of dust resistance and can be used in environments such as deserts. However, it is recommended to avoid direct contact between the lens and sand or to use a Lens Guard for added protection.
X3	IP6X	Standard dust resistance; X3's microphone hole has a metal dust mesh.
X2 and ONE X	IP6X	N/A

FAQ

1. Can X6, X5, X4 Air, X4, X3, and X2 cameras be used directly underwater? Can they be used without a Dive Case or with a Lens Guard? Can I shoot underwater without using a Dive Case?

Although these models are water-resistant without a Dive Case, water refraction can affect lens focus and stitching quality. For optimal shots, we recommend using the Insta360 Dive Case (with anti-fog inserts).

Please note: The Lens Guard cannot be used simultaneously with a Dive Case.

2. What precautions should be taken when using the X6, X5, X4 Air, X4, X3, and X2 underwater without a Dive Case?

• Before use: Carefully check the camera's battery cover, rubber seal, and USB cover seal to ensure they are free from damage, sand, dust, or other foreign objects. Also, ensure the battery cover and USB cover are securely closed with no orange marking visible. If necessary, clean them with a lint-free cloth.
• After use: After shooting, rinse the camera surface with clean water and soak it in fresh water for 5 to 10 minutes. Then, wipe it dry with a soft cloth and leave it in a well-ventilated area to air dry. Do not remove the battery or perform any other operations until the camera surface is completely dry.

Please note: ONE X is not waterproof without a Dive Case and cannot be used directly underwater. For underwater shooting, we recommend using the Insta360 Dive Case.

3. Can the camera buttons be used underwater without a Dive Case? How do I control the camera when shooting underwater? Will pressing the buttons affect water resistance?

To avoid accidental screen touches caused by water flow when using the camera underwater, you can control shooting as follows:

• X6, X5, X4 Air, X4, and X3: Enable the Dive Case Mode, then use the Power button to switch modes and the Shutter button for shooting.
• X2: Enable the Screen Lock feature, then use the Power button to switch modes and the Shutter button for shooting.

Please note: When the camera is properly sealed, pressing the buttons within the rated depth will not affect its waterproof performance (up to 65.6ft (20m) for X6, 49.2ft (15m) for X5/X4 Air, and 32.8ft (10m) for X4/X3/X2).