Third-Person Bike Tail Mount: Installation Guide & FAQ
Third-Person Bike Tail Mount: Installation Guide & FAQ
Applicable Product: Third-Person Bike Tail Mount
The Third-Person Bike Tail Mount secures your camera to the bike's seat post, enabling third-person perspective shots while cycling. This article provides installation instructions and some FAQs for the Third-Person Bike Tail Mount, helping you install and use the accessory correctly to ensure riding safety while achieving smooth, unobstructed capturing of media.
How to Install the Third-Person Bike Tail Mount (only compatible with X2, X3, X4, X4 Air, and X5)
- Loosen the screw on the tail mount, fully open the mount, and install it at an appropriate position on the bike's seat post. Adjust it to ensure it is secure, then tighten the screw.
- Screw the Invisible Selfie Stick onto the connector on the tail mount, and adjust the length of the selfie stick as needed for your shot.
- Attach your camera to the camera mount at the end of the Invisible Selfie Stick, ensuring the connection is secure.
For a more intuitive operational demonstration, please refer to Bike Tail Mount Kit Tutorial
Notes
- The Third-Person Bike Tail Mount is compatible with seat post diameters ranging from 0.98in (25mm) to 1.26in (32mm). Please ensure your bike's seat post meets this requirement before installation.
- When using a 360 lens, ensure the Invisible Selfie Stick is parallel to the camera during installation for optimal media.
- For flat road cycling, we recommend controlling your speed within 37mph (60km/h). Avoid using this accessory in strong wind conditions or on mountain roads.
- After use, promptly remove your camera from the Third-Person Bike Tail Mount and store it properly.
- Please use the accessory strictly according to the operating instructions. Do not modify it or attach non-Insta360 accessories.
FAQ
1. What is the adjustable angle range of the Third-Person Bike Tail Mount?
The angle adjustment range of the Third-Person Bike Tail Mount is ±90°. Using the installation direction of the tail mount as the 0° reference, the main body of the tail mount can be tilted up or down by a maximum of 90°. You can adjust it flexibly based on the positions of your bike frame, seat, tire, and your specific shooting needs. We recommend you adjust it to a position that does not interfere with the frame or block tire rotation to ensure safe use and optimal footage quality.
2. What is the distance between the two clamping arms of the tail mount?
The width is 2.36in (60mm).
