Snap Selfie Screen: Hardware Specifications

Parameter Type

Item

Selfie Screen

Product Name

Insta360 Snap Selfie Screen

Insta360 Snap Selfie Screen with Light

Release Information

Release Date

March 5, 2026

March 5, 2026

Hardware

Color

White main unit, light gray protective cover

White main unit, light gray protective cover

Selfie Screen Dimensions (W × H × D)

3.9 × 2.7 × 0.3in (100 × 60 × 7.3mm)

4.7 × 2.7 × 0.3in (103 × 67.5 × 8.2mm)

Selfie Screen Weight

2.7oz (75.5g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

3.1oz (88.6g)

*The actual weight may vary slightly depending on configuration, manufacturing process, and measurement method.

Screen Refresh Rate

60Hz

60Hz

Screen Dimensions

3.5 inches

3.5 inches

Screen Brightness

550 nits

550 nits

Screen Resolution

480 × 800 pixels

267ppi

480 × 800 pixels

267ppi

Screen Material

LCD

LCD

Protective Cover Material

Plastic and faux leather

Plastic and faux leather

Video Output Protocol

USB-C video output (supports DisplayPort Alt Mode)

USB-C video output (supports DisplayPort Alt Mode)

Input Specification

5V/1A

5V/1A

Temperature/Waterproof

Operating Temperature

14°F (-10°C) to 113°F (45°C)

14°F (-10°C) to 113°F (45°C)

Waterproof Rating

Not waterproof

Not waterproof

Application Scenarios

Recommended Application Scenarios

Daily & Travel Selfies

It supports convenient selfies in multiple scenarios, such as store visits, gatherings, and couple photos. Ideal for creators who pursue an elegant look and effortless everyday recording.

Beauty & Fashion Content Creation

It supports real-time preview of the final shot from the phone's rear camera, enabling precise control over composition and framing, as well as delivering enhanced visual quality for beauty, makeup, and fashion styling content.

Vlogging & Product Sharing

Ideal for vlogging, product recommendations, and creation of similar content, helping beginner creators produce high-quality videos with enhanced visual quality.

Daily & Travel Selfies

It supports convenient selfies in multiple scenarios, such as store visits, gatherings, and couple photos. Ideal for creators who pursue an elegant look and effortless everyday recording.

Beauty & Fashion Content Creation

With upgraded fill light, it adapts to a variety of lighting conditions, delivering smooth, natural image quality. It supports real-time preview of the final shot from the rear camera, enabling precise control over composition and framing, as well as delivering enhanced visual quality for beauty, makeup, and fashion styling content.

Vlogging & Product Sharing

Ideal for vlogging, product recommendations, and creation of similar content, helping beginner creators produce high-quality videos with enhanced visual quality.

Notes

Instructions for Use

1. Your device must support the DisplayPort protocol and have a USB-C port. Lightning to USB‑C adapters are not supported. For compatible models, please refer to Selfie Screen: Compatibility.
2. After powering on the Selfie Screen, press and hold the Power Button and Mirror Button at the same time to view the authentication information. Tap the touchscreen lightly to exit.
3. When the Selfie Screen is connected to an iPhone, slight color variations between the Selfie Screen and the phone display are normal and do not affect functionality.
4. Due to system limitations on some phones, issues like insensitivity to touches on the edges or non-functional buttons (e.g., pull-down menu, fail to zoom, or lens switching) may occur.
5. When using the Selfie Screen, your phone may consume more power and warm up slightly. If lag occurs during shooting, disconnect the phone from the Selfie Screen, and you can use it again after the phone returns to room temperature.
6. If the Selfie Screen overheats, the screen brightness will be automatically reduced.
7. When used with a selfie stick, securely clamp the Selfie Screen and phone case to prevent damage from drops.
8. Do not use the Selfie Screen in intense motion scenarios to prevent damage caused by drops.
9. When disconnecting, avoid pulling on the Selfie Screen—instead, grip the USB-C connector to remove the cable.
10. Always hold the main unit when handling the Selfie Screen; never swing the Selfie Screen by the cable to prevent internal connection issues.
11. Do not disassemble or attempt to repair the product yourself in any way.
12. The Magnetic Ring is a small component. Be sure to keep it out of reach of children to prevent the risk of suffocation due to accidental ingestion.
13. The Selfie Screen and Magnetic Ring contain magnets. Keep them away from pacemakers and other devices to avoid interference.
14. If the outer surface of the Selfie Screen Protective Cover gets dirty, gently clean it with water or a neutral detergent, and let it air dry in a cool, ventilated place. Avoid vigorous rubbing, scrubbing, direct sunlight, or high-temperature drying.

1. Your device must support the DisplayPort protocol and have a USB-C port. Lightning to USB‑C adapters are not supported. For compatible models, please refer to Selfie Screen: Compatibility.
2. After powering on the Selfie Screen, press and hold the Power Button and the Mirror Button at the same time to view the authentication information. Tap the touchscreen lightly to exit.
3. When the Selfie Screen is connected to an iPhone, slight color variations between the Selfie Screen and the phone display are normal and do not affect functionality.
4. Due to system limitations on some phones, issues like insensitivity to touches on the edges or non-functional buttons (e.g., pull-down menu, fail to zoom, or lens switching) may occur.
5. When using the Selfie Screen, your phone may consume more power and warm up slightly. If lag occurs during shooting, disconnect the phone from the Selfie Screen, and you can use it again after the phone returns to room temperature.
6. If the Selfie Screen overheats, the screen brightness will be automatically reduced.
7. When used with a selfie stick, securely clamp the Selfie Screen and phone case to prevent damage from drops.
8. Do not use the Selfie Screen in intense motion scenarios to prevent damage caused by drops.
9. When disconnecting, avoid pulling on the Selfie Screen—instead, grip the USB-C connector to remove the cable.
10. Always hold the main unit when handling the Selfie Screen; never swing the Selfie Screen by the cable to prevent internal connection issues.
11. Do not disassemble or attempt to repair the product yourself in any way.
12. The Magnetic Ring is a small component. Be sure to keep it out of reach of children to prevent the risk of suffocation due to accidental ingestion.
13. The Selfie Screen and Magnetic Ring contain magnets. Keep them away from pacemakers and other devices to avoid interference.
14. If the outer surface of the Selfie Screen Protective Cover gets dirty, gently clean it with water or a neutral detergent, and let it air dry in a cool, ventilated place. Avoid vigorous rubbing, scrubbing, direct sunlight, or high-temperature drying.