Link Series: Privacy Mode

Link Series: Privacy Mode

Applicable Models: Link, Link 2, Link 2C, Link 2 Pro, and Link 2C Pro

How to enable the Privacy Mode

Link, Link 2, and Link 2 Pro

Method 1: If the camera remains inactive for 10 consecutive seconds, the lens will automatically rotate downwards and enter the sleep mode, effectively protecting your privacy.

Method 2 (for Link 2 and Link 2 Pro): Manually tilt the gimbal downwards to the 90° position to quickly activate the Privacy Mode.

Please note: The Privacy Mode will not be activated if the gimbal is tilted upwards.

Link 2C and Link 2C Pro

You can easily activate or deactivate the Privacy Mode by sliding the privacy cover switch on the camera.

FAQ

1. Can the microphone be muted in the Privacy Mode?

You can enhance privacy protection through Insta360 Link Controller: Navigate to "More" > "Other Settings" > select "Mute in Privacy Mode". Steps for different versions of Link Controller:

• New version of Link Controller (v2.2.1 and later): On the top control bar, tap "…" > "Settings" > "Audio", then enable "Mute in Privacy Mode".

• Old version of Link Controller (versions prior to v2.2.1): "More" > "Other Settings" > enable "Mute in Privacy Mode"..

Please note:

• Only Link 2 supports this feature, while Link and Link 2C do not.
• This setting only turns off the Link 2's built-in microphone and cannot turn off the microphone of third-party software.
• Link 2 Pro and Link 2C Pro are muted by default in the Privacy Mode and do not support adjustment.

2. Can the default Privacy Mode be disabled?

No, it cannot be disabled.

3. How do I exit the Privacy Mode and wake up the Link series camera?

When the camera is in the Privacy Mode, you can wake it up using any of the following methods:

• Software Wakeup: Re-open the application that requires the camera (e.g., a video meeting app) on your computer. The camera will automatically wake up when the software starts capturing the video stream.
• Manual Wakeup: Manually tilt the camera gimbal upwards to its normal operating angle to exit the Privacy Mode.
• Reconnecting: Disconnect and then reconnect the camera's USB cable. The camera will function normally after re-establishing the connection.

4. When will Link series cameras enter the sleep mode (camera facing downward)?

• In Link Controller: When you close Link Controller or turn off the preview.
• In third‑party software: When the third‑party software accessing the Link series camera is closed.
• In meeting scenarios: When only audio is enabled and video streaming is off, the Link series camera will automatically enter the sleep mode after 10 seconds.