Waterproofing

1. GO 3S (when taken out of the Action Pod) is waterproof up to 33ft (10m). The included Lens Guard must be installed on the camera for underwater use. Otherwise, the camera will not be waterproof, and the shooting effect will be affected. The Lens Guard is installed by default.
2. The Action Pod is IPX4 water resistant only when GO 3S is installed. It protects against light rain and snow but should not be submerged in water or used for high-velocity water activities, such as action sports during rainy weather, surfing, and waterskiing.
3. For extended underwater use, use the GO 3S Dive Case. With the Dive Case, GO 3S and the Action Pod are waterproof to 197ft (60m).
4. Before using it underwater, ensure the charging points on the back of GO 3S and the Action Pod are not damaged or oxidized.
5. After using the GO 3S (without the Action Pod) in seawater: a. Rinse the camera with fresh water. b. Soak it in fresh water for 10 minutes. c. Dry it with a soft cloth and place it in a ventilated area to dry naturally. Wait until the camera is completely dry before using it again.

To maintain the waterproofing of GO 3S:

1. Do not use a hair dryer to dry the camera; it may affect the microphone and speaker and damage the internal waterproofing ability.
2. Avoid operating GO 3S for extended periods (>1 hour) outside the recommended temperature range (-4°F to 104°F/-20℃ to 40℃) or in humid environments.
3. Do not store the camera in high-temperature or high-humidity environments, and avoid storing it with items such as perfume and cosmetics to avoid contact corrosion.
4. Avoid entering water at high speeds, as excessive water impact and pressure may damage the device.
5. Try to avoid serious drops and impacts.
6. Do not disassemble the camera.