Unfolding and Folding

Install Your Phone

1. Following the direction indicated by the icon on the right side of the Magnetic Phone Clamp, stretch the Magnetic Phone Clamp around the middle of your phone.
   
2. Align and attach the magnetic notch on the back of the Magnetic Phone Clamp to the raised bump on the gimbal's magnetic surface.
   
3. Hold the transparent battery shell and pull the handle downwards in the direction indicated by the arrow to unfold it. The gimbal will automatically power on, and the indicator lights will turn on.
   
   

Notes:

• Ensure the direction of your phone's camera is the same as the direction marked on the Magnetic Phone Clamp.
  
• Position the Magnetic Phone Clamp in the middle of your phone so that both sides stretch the same distance and fit around the phone.
  
• Attach your phone to the Magnetic Phone Clamp first, then attach and unfold Flow Pro.
  
• Each time Flow Pro is powered on, it automatically detects if a phone is mounted within 30 seconds. If no phone is detected, it automatically enters standby mode.
  
  

Built-In Selfie Stick and Tripod
Flow Pro comes with a built-in selfie stick and tripod. The selfie stick has five sections and extends to a maximum length of 215mm. The angle adjustment range is 0-90°.

Once fully extended and unfolded, the tripod can be used to temporarily place Flow Pro on a windless, stable and flat surface. It should not be placed on sand.

Notes:

• When pulling out the tripod, it is recommended to pull out all legs together, not individually.
  
• When storing the tripod, you need to fold it first, then slowly push it back in with the palm of your hand.
  
• If you have the selfie stick extended for a long time, it's recommended to attach an external tripod through the 1/4" screw hole at the bottom of Flow Pro's handle for more support and use in a wider range of scenarios.
  
• Use the silicone grip cover to make the handle more comfortable to hold and protect it.
  
  

Folding Up

1. Fold the handle up and Flow Pro will automatically shut down.
   
2. Take off the Magnetic Phone Clamp, then remove it from your phone.
   
   
   Please click here to contact us for further support.