Battery/Charging

1. What is the battery capacity and runtime of Flow 2 Pro?

The battery capacity is 1100 mAh with a runtime of approximately 10 hours*.
*Tested under room temperature conditions (77°F/25℃), with the gimbal fully balanced on a flat surface and the Tracking Ring Light turned off.

2. How long does Flow 2 Pro take to fully charge?

With a 5V/2A power adapter, it takes about 2 hours to fully charge.

3. What charging cable does Flow 2 Pro use?

USB Type-C. You can use the included USB Type-C to A charging cable or a Type-C to C cable to charge Flow 2 Pro. The charging port is the USB Type-C port on the handle.

4. Can I replace Flow 2 Pro's battery?

Sorry, no. If you experience issues with the battery, please contact our support team at service@insta360.com.

5. Can Flow 2 Pro be used as a phone charger?

Yes, Flow 2 Pro doubles as an emergency power bank. Insert your phone's charging cable into the USB port next to the Magnetic Phone Clamp.
Note: If Flow 2 Pro is powered on, the battery percentage must be at least 30% to charge your phone. When it reaches 30% or lower, Flow 2 Pro will stop charging your phone.
If Flow 2 Pro is powered off, click the Power Button once to start phone charging. Flow 2 Pro will charge your phone until its own battery runs out.

6. How do I check the battery level of Flow 2 Pro?

You can check the battery level on the device itself or through the Insta360 app.

  • Through the touch panel indicator: Gimbal powered on: Single-press the M button and the trigger button. Gimbal powered off: Single-press the M button.
    • All four lights on: 75% to 100%
    • M, shutter, and C indicators on: 50% to 74%
    • M and shutter on: 25% to 49%
    • Only M on: 6% to 24%
    • M blinking fast: less than 6%
  • Insta360 app: With the device connected to the Insta360 app, you'll see the battery level on the shooting tab.
Online Chat
Office Hours: 24/7
Start Chat