Insta360 App: How to Connect Huawei Watch to Control the Camera
Insta360 App: How to Connect Huawei Watch to Control the Camera
Applicable Models: X5, X4 Air, Ace Pro 2, and GO Ultra
The Insta360 app can be downloaded from HUAWEI AppGallery on your Huawei Watch, supporting remote control of your camera via both touch and gestures. This article provides a complete guide to downloading and installing the Insta360 app, connecting it to your camera, and using the gesture control feature, helping you enjoy a convenient wrist-based shooting experience.
Device Compatibility
|
Brand
|
HUAWEI
|
|
Supported Watch Models
|
HUAWEI WATCH 5
HUAWEI WATCH Ultimate 2
|
|
Compatible Insta360 Camera Models & Firmware Versions (Continuously Updated)
|
X5 (v1.5.6 or later)
GO Ultra (v1.1.16 or later)
Ace Pro 2 (v1.2.53 or later)
|
|
Required Insta360 App Versions
|
v2.9.1 or later
|
|
Key Features
|
- Control the camera via touchscreen, buttons, or gestures for shooting operations.
- System compatibility: The standalone Insta360 app is optimized for HarmonyOS, ensuring smooth operation.
- Auto-reconnection: The Insta360 app automatically connects to the last paired camera when opened, no manual selection required.
|
Instructions
1. Install the Insta360 app on your watch
Open AppGallery on your HUAWEI watch, search for the Insta360 app, then download and install it.
2. Connect the app to your camera
Press the crown to enter the watch's home screen > find the Insta360 app and tap it; the app will automatically search for the camera > select your camera to connect > enter the Shooting page and you can start using it.
For a more intuitive operational demonstration, please refer to How to Use the Insta360 App on a Huawei Watch
3. Control the camera
The table below details the button and gesture control functions of the Insta360 app on your Huawei Watch, helping you quickly master the operating logic:
|
Control Type
|
Action
|
Function
|
|
Button Control
|
Press the crown once
|
Exit the Insta360 app
|
|
Swipe left on the screen
|
Go back to the previous page
|
|
Press the crown twice
|
Switch from/to the Insta360 app or exit the Insta360 app
|
|
Gesture Control
|
Tap the tip of your index finger against your thumb twice in succession (double-pinch)
|
Start or stop shooting
|
For a more intuitive operational demonstration, please refer to How to Control Shooting via Gestures
Please note:
- For the gesture control, perform two consecutive taps and release your fingers promptly afterward; avoid pinching.
- Ensure your tapping force and speed are moderate for accurate gesture recognition.
FAQ
What should I do if the gesture control feature doesn't work or is unresponsive?
We recommend you follow these steps to troubleshoot and quickly resolve the issue:
- Disable Battery Saver: Swipe down on the watch screen to check the Battery Saver toggle. Disable "Battery Saver" as the gesture control feature is not supported in this mode.
- Check the Gesture Control settings: Go to "Settings" on your watch > select "Gestures", complete the steps illustrated in the tutorial, enable Detect Smart Gestures, and check if the gesture control feature works properly.
- Adjust how you wear the watch: The watch should not be worn too loosely or too tightly. It is recommended to wear it further back on your wrist, away from the wrist bone, to avoid affecting the gesture recognition by the optical sensor.
- Choose a suitable scenario: The success rate of gesture recognition may decrease when your arm is hanging down, under pressure, or in motion. Try to keep your arm raised horizontally and your hand stable.
- Confirm the shooting page: Ensure the focus aperture is visible in the shooting page. If it is not showing, press the crown twice to close background apps, then re-enter the Insta360 app.
.svg)
