Mic Pro: Powering On/Off

Mic Pro: Powering On/Off

Applicable Models: Mic Pro

This article describes how to set auto power-on/power-off and power-on/power-off synchronization with a camera for the microphone and provides some FAQ answers, helping you shoot efficiently and conveniently.

How to set auto power-off for Mic Pro

Swipe down from the top of the receiver touchscreen to enter the Control Center > tap "RX Settings" > "Auto Power Off" > enable the feature.

After this setting is configured, the receiver will automatically power off 15 minutes after being turned on if it is not connected to any device and is not performing internal recording.

How to set power-on/power-off synchronization with a camera for Mic Pro

The "Sync Camera Power" feature is enabled by default. You can set it up as follows:

1. Make sure your camera is in the Video Mode.

2. Swipe down from the top of the receiver touchscreen to enter the Control Center > tap "RX Settings" > "Sync Camera Power" > enable the feature.

After this setting is configured, when the receiver is connected to the camera via a 3.5mm audio cable: turning on the camera will automatically turn on the receiver; turning off the camera will automatically turn off the receiver.

FAQ

For which cameras is the "Sync Camera Power" feature available? Is it available for Insta360 cameras?

The "Sync Camera Power" feature is available for third-party cameras with a 3.5mm audio jack, such as DSLR and mirrorless cameras. It is unavailable for action cameras like Insta360 models.