GO Series: Lens Guard

GO Series: Lens Guard

Applicable Models: GO 3, GO 3S, and GO Ultra

The Lens Guard included with the camera is specially designed to protect the lens, effectively preventing scratches and wear. It provides reliable daily protection, so you can shoot worry-free.

---

How to install/remove the Lens Guard?

The Lens Guard can be removed and replaced by users. However, it is recommended not to remove it during daily use to prevent lens abrasion.

1. Installation: Rotate the Lens Guard clockwise in the direction indicated by the arrow until it is securely fastened.

Please note:

• Before installation, make sure that the Lens Guard, camera lens, and surrounding surfaces are clean and dry.
• When installing the Lens Guard, ensure it is securely tightened to prevent it from loosening or falling off during shooting.

2. Removal: Rotate the Lens Guard counterclockwise in the direction indicated by the arrow to remove it.

FAQ

1. Do I need to remove the Lens Guard when using the ND filter?

Yes, you need to remove the Lens Guard. Before using the ND filter, you need to rotate and remove the Lens Guard from the camera counterclockwise, then install the ND filter onto the camera lens.

2. Can the camera be placed in the Dive Case after installing the Lens Guard and Screen Protector?

Yes. The Lens Guard and Screen Protector are compatible with the Dive Case. The camera can still be inserted into the Dive Case normally with them.

3. In high-temperature environments, if a Lens Guard containing air is submerged in water, will it fog up?

Fog may form on the Lens Guard, but this will not affect the camera's internal lens. If the Lens Guard fogs up, it is recommended to unscrew it first and let the fog air-dry naturally before reinstalling it.

4. What is the thread size of the Lens Guard?

GO 3: M15 × P0.5

GO 3S: M16.3 × P0.5

GO Ultra: N/A

5. Why is there a small notch at the bottom of the thread on GO Ultra's Lens Guard?

This notch is a "sprue" from the production process, a necessary feature for material injection and molding. It does not affect the lens protection, so you can use it with confidence.